10511-30-10
VFP Equivalent
Hydraulic Fitting Cross Reference
Continental SG-DHM-1030
ALSO 29225-1030 · DIN 24° HEAVY
The VFP equivalent of Continental SG-DHM-1030 is 10511-30-10 — matched on thread, seat geometry and hose construction class. Stocked in Ontario, invoiced in CAD.
-undefined · 5/8"
Hose I.D.
30x2.0
Thread
NO-SKIVE
Skive Requirement
Specifications
SG-DHM-1030 full specifications
| Hose size (dash) | -undefined |
| Hose I.D. (in) | 5/8 |
| Thread | 30x2.0 |
| Seat / sealing | Metric DIN 24° cone, heavy series (S), male, straight |
| Overall length (in) | 2.99 |
| Overall length (mm) | 75.9 |
| Cut-off length (in) | 1.40 |
| Cut-off length (mm) | 35.6 |
| Skive requirement | Non-skive (braided hose class) |
| Ferrule pairing | VFP 00110-A / 00110 / 00210 / 03310 ferrule class — fits SAE100 R1AT, EN853 1SN, SAE100 R2AT, EN853 2SN, SAE100 R1AT/R2AT, EN853 1SN/2SN |
| VFP one-piece variant (+RW) | 10511-30-10RW |
| Hose construction class | braid-non-skive |
Dimensions as published in the Continental catalog, p.215. Verify critical dimensions against the current catalog before ordering.
Interchange
Interchange across brands
Fittings sharing the end configuration and size of Continental SG-DHM-1030. Every part number below is listed in that brand's own catalog. Rows marked “verify” are matched on catalog description rather than a brand-specific decode.
| Brand | Part Number | Status |
|---|---|---|
| Balflex | BW2310-30DHM | CONFIRMED |
| Continental | B2-DHM-1030 | CONFIRMED |
| Future | A-11210-10-30 | CONFIRMED |
| Gates | G25715-1020 | CONFIRMED |
| Manuli | M11210-10-30 | CONFIRMED |
All manufacturer names and part numbers are trademarks of their respective owners, used for compatibility reference only. Velocity Fluid Power is not affiliated with Continental.
Same Series
Other sizes in SG-DHM
DIN 24° Heavy in other hose and thread sizes — each with its own VFP equivalent.
FAQ
SG-DHM-1030 — common questions
- What is the VFP equivalent of Continental SG-DHM-1030?
- The VFP equivalent is 10511-30-10. The interchange is matched on thread, seat geometry and hose construction class. It is also listed as 29225-1030 in the Continental catalog.
- Does SG-DHM-1030 require skiving?
- Skive requirement: Non-skive (braided hose class). One-piece fittings never require skiving; for two-piece fittings the requirement follows the hose construction class.
- What thread and hose size does SG-DHM-1030 use?
- Thread: 30x2.0. Hose I.D.: 5/8". End configuration: Metric DIN 24° cone, heavy series (S), male, straight.
- Can I buy this fitting in Canada?
- Yes. Velocity Fluid Power stocks this fitting range in Ontario with CAD invoicing and local support — manufacturer-direct pricing, no cross-border freight.
Request a Quote
Quote the Continental SG-DHM-1030 equivalent
Send us your part list — we cross-reference Continental SG-DHM-1030 and the rest of your BOM against VFP equivalents and quote from Ontario stock in CAD.
Email canada.sales@velocityfluidpower.com
Phone 1-519-574-2845
Office Ontario, Canada
Hours Mon–Fri · Canadian business hours