15611-04-03
VFP Equivalent
Hydraulic Fitting Cross Reference
Gates 80002
ALSO 3-4MP · MALE PIPE (NPTF - 30° CONE SEAT)
The VFP equivalent of Gates 80002 is 15611-04-03 — matched on thread, seat geometry and hose construction class. Stocked in Ontario, invoiced in CAD.
-3 · 3/16"
Hose I.D.
1/4-18
Thread
NO-SKIVE
Skive Requirement
Part Number Decoded
What 80002 means
Segment-by-segment breakdown — the same decode rules we use in-house to cross-reference incoming part lists.
80002
Male Pipe (NPTF - 30° Cone Seat)
Specifications
80002 full specifications
| Hose size (dash) | -3 |
| Hose I.D. (in) | 3/16 |
| Hose I.D. (mm) | 4.8 |
| Thread | 1/4-18 |
| Seat / sealing | NPT taper pipe, male, straight |
| Hex across flats (in) | 9/16 |
| Overall length (in) | 2.22 |
| Overall length (mm) | 56.4 |
| Cut-off length (in) | 1.13 |
| Cut-off length (mm) | 28.8 |
| Skive requirement | Non-skive (braided hose class) |
| Ferrule pairing | VFP 00110-A / 00110 / 00210 / 03310 ferrule class — fits SAE100 R1AT, EN853 1SN, SAE100 R2AT, EN853 2SN, SAE100 R1AT/R2AT, EN853 1SN/2SN |
| VFP one-piece variant (+RW) | 15611-04-03RW |
| Hose construction class | braid-non-skive |
Dimensions as published in the Gates catalog, p.408. Verify critical dimensions against the current catalog before ordering.
Interchange
Interchange across brands
Fittings sharing the end configuration and size of Gates 80002. Every part number below is listed in that brand's own catalog. Rows marked “verify” are matched on catalog description rather than a brand-specific decode.
| Brand | Part Number | Status |
|---|---|---|
| Continental | T7-NPM-0304 | CONFIRMED |
| Future | ST12810-03-04 | CONFIRMED |
| Manuli | M12810-03-04 | CONFIRMED |
| Pulsar | 4716-04-03 | CONFIRMED |
All manufacturer names and part numbers are trademarks of their respective owners, used for compatibility reference only. Velocity Fluid Power is not affiliated with Gates.
FAQ
80002 — common questions
- What is the VFP equivalent of Gates 80002?
- The VFP equivalent is 15611-04-03. The interchange is matched on thread, seat geometry and hose construction class. It is also listed as 3-4MP in the Gates catalog.
- Does 80002 require skiving?
- Skive requirement: Non-skive (braided hose class). One-piece fittings never require skiving; for two-piece fittings the requirement follows the hose construction class.
- What thread and hose size does 80002 use?
- Thread: 1/4-18. Hose I.D.: 3/16" (4.8 mm). End configuration: NPT taper pipe, male, straight.
- Can I buy this fitting in Canada?
- Yes. Velocity Fluid Power stocks this fitting range in Ontario with CAD invoicing and local support — manufacturer-direct pricing, no cross-border freight.
Request a Quote
Quote the Gates 80002 equivalent
Send us your part list — we cross-reference Gates 80002 and the rest of your BOM against VFP equivalents and quote from Ontario stock in CAD.
Email canada.sales@velocityfluidpower.com
Phone 1-519-574-2845
Office Ontario, Canada
Hours Mon–Fri · Canadian business hours