15611-06-04
VFP Equivalent
Hydraulic Fitting Cross Reference
Gates G25100-0406
ALSO 4G-6MP · MALE PIPE (NPTF - 30° CONE SEAT)
The VFP equivalent of Gates G25100-0406 is 15611-06-04 — matched on thread, seat geometry and hose construction class. Stocked in Ontario, invoiced in CAD.
-4 · 1/4"
Hose I.D.
3/8-18
Thread
NO-SKIVE
Skive Requirement
Part Number Decoded
What G25100-0406 means
Segment-by-segment breakdown — the same decode rules we use in-house to cross-reference incoming part lists.
G25100
Male Pipe (NPTF - 30° Cone Seat) — Gates style code
04
Hose I.D. -4 (1/4")
06
Fitting end size -6 · NPT taper pipe, male, straight
Specifications
G25100-0406 full specifications
| Hose size (dash) | -4 |
| Hose I.D. (in) | 1/4 |
| Hose I.D. (mm) | 6.4 |
| Thread | 3/8-18 |
| Seat / sealing | NPT taper pipe, male, straight |
| Hex across flats (in) | 11/16 |
| Overall length (in) | 2.17 |
| Overall length (mm) | 55.1 |
| Cut-off length (in) | 1.14 |
| Cut-off length (mm) | 29.0 |
| Skive requirement | Non-skive (braided hose class) |
| Ferrule pairing | VFP 00110-A / 00110 / 00210 / 03310 ferrule class — fits SAE100 R1AT, EN853 1SN, SAE100 R2AT, EN853 2SN, SAE100 R1AT/R2AT, EN853 1SN/2SN |
| VFP one-piece variant (+RW) | 15611-06-04RW |
| Hose construction class | braid-non-skive |
Dimensions as published in the Gates catalog, p.349. Verify critical dimensions against the current catalog before ordering.
Interchange
Interchange across brands
Fittings sharing the end configuration and size of Gates G25100-0406. Every part number below is listed in that brand's own catalog. Rows marked “verify” are matched on catalog description rather than a brand-specific decode.
| Brand | Part Number | Status |
|---|---|---|
| Balflex | BW2304-06MP | CONFIRMED |
| Continental | B2-NPM-0406 | CONFIRMED |
| Future | ST12810-04-06 | CONFIRMED |
| Jason | 1220-0604 | CONFIRMED |
| Manuli | M12810-04-06 | CONFIRMED |
| Parker | 10143-6-4 | CONFIRMED |
| Pulsar | 4216-06-04 | CONFIRMED |
All manufacturer names and part numbers are trademarks of their respective owners, used for compatibility reference only. Velocity Fluid Power is not affiliated with Gates.
Same Series
Other sizes in G25100
Male Pipe (NPTF - 30° Cone Seat) in other hose and thread sizes — each with its own VFP equivalent.
FAQ
G25100-0406 — common questions
- What is the VFP equivalent of Gates G25100-0406?
- The VFP equivalent is 15611-06-04. The interchange is matched on thread, seat geometry and hose construction class. It is also listed as 4G-6MP in the Gates catalog.
- Does G25100-0406 require skiving?
- Skive requirement: Non-skive (braided hose class). One-piece fittings never require skiving; for two-piece fittings the requirement follows the hose construction class.
- What thread and hose size does G25100-0406 use?
- Thread: 3/8-18. Hose I.D.: 1/4" (6.4 mm). End configuration: NPT taper pipe, male, straight.
- Can I buy this fitting in Canada?
- Yes. Velocity Fluid Power stocks this fitting range in Ontario with CAD invoicing and local support — manufacturer-direct pricing, no cross-border freight.
Request a Quote
Quote the Gates G25100-0406 equivalent
Send us your part list — we cross-reference Gates G25100-0406 and the rest of your BOM against VFP equivalents and quote from Ontario stock in CAD.
Email canada.sales@velocityfluidpower.com
Phone 1-519-574-2845
Office Ontario, Canada
Hours Mon–Fri · Canadian business hours